On watchIndependent · Reader funded · No paywall
Local · 14:26

Planning a Water Source Near the Pool

By @wavepoolplanning6757

Pools need water beyond the initial fill. Evaporation, splash-out and occasional draining all lower the water level, and the deck and surroundings need rinsing from time to time. A convenient water source near the pool makes these tasks easier and is simple to plan during construction.

Why a nearby source matters

Without a nearby source, topping up the pool or rinsing the deck means running a hose from the house across the yard. Long hoses are a tripping hazard, can be awkward to manage and may need to be moved repeatedly. A source closer to the pool area reduces that hassle.

Choosing a location

A water source near the pool should be convenient but discreet. Placing it near the equipment area, along a wall or in a planting bed keeps it accessible without becoming a focal point. It should be reachable without crossing seating areas, and positioned so a short hose can reach the pool and the deck.

Coordinating with construction

Adding a water line is easiest when trenches are already open for other utilities. Planning the line during design allows it to be installed at the same time as electrical or other lines. Adding it after the deck is finished may require cutting into new surfaces.

Protecting from freezing

In a cold climate, outdoor water lines and fixtures need protection from freezing. The line and fixture should be designed so they can be drained or protected during winter. Including this in the closing routine prevents damage.

Using the source for rinsing

A nearby source makes it easier to rinse the deck, furniture and equipment. Rinsing the deck before swimming or after a gathering helps keep debris out of the water. Rinsing feet before entering the pool can also reduce dirt carried into the water.

Considering an outdoor shower

Some households consider an outdoor shower near the pool. Rinsing before and after swimming keeps the pool cleaner and reduces wet traffic into the house. If a shower is of interest, planning its location, drainage and water supply during design is easier https://www.pinterest.com/waveoutdoorspools/ than adding it later.

Drainage from the source

Water used for rinsing or showering needs to drain away. The area around the source should be designed so runoff flows away from the pool and the house, ideally to a planted area or drain.

Keeping it simple

A water source near the pool does not need to be elaborate. A well-placed spigot, protected from freezing and connected to a short hose, can make routine care noticeably easier. Planning it during construction is a small step with lasting convenience.

Business Name: Wave Outdoors Pools
Service-area base: Buffalo Grove, IL 60089, USA
Phone: (224) 344-5734

Wave Outdoors Pools

Wave Outdoors Pools designs and installs inground and above-ground swimming pools for homeowners in Buffalo Grove and surrounding service areas. Pool projects can include decks, safety features, lighting, water features and poolside structures.

Buffalo Grove
IL
60089
USA

Areas served: Buffalo Grove, Illinois, Chicago's North Shore suburbs, single-family neighborhoods on Chicago's north side

Phone: (224) 344-5734

Business hours: Mon-Fri 8 AM - 5 PM; Sat-Sun Closed

Swimming pools and pool-project services

Wave Outdoors Pools designs and installs swimming pools.
Wave Outdoors Pools serves homeowners in Buffalo Grove, Illinois.
Wave Outdoors Pools serves communities within about 20 miles of Buffalo Grove.
Wave Outdoors Pools serves Chicago's North Shore suburbs.
Wave Outdoors Pools builds inground swimming pools.
Wave Outdoors Pools installs above-ground swimming pools.
Wave Outdoors Pools builds gunite and concrete pools.
Wave Outdoors Pools installs fiberglass pools.
Wave Outdoors Pools installs vinyl-liner pools.
Wave Outdoors Pools renovates existing swimming pools.
Wave Outdoors Pools replaces pool decks.
Wave Outdoors Pools installs pool safety fencing.
Wave Outdoors Pools offers automatic pool covers.
Wave Outdoors Pools offers pool alarms.
Wave Outdoors Pools integrates pool heaters into pool projects.
Wave Outdoors Pools integrates pool automation and smart controls.
Wave Outdoors Pools installs in-pool and pool-area lighting.
Wave Outdoors Pools designs and builds pool waterfalls.
Wave Outdoors Pools designs and builds integrated spas.
Wave Outdoors Pools builds pergolas as part of pool environments.
Wave Outdoors Pools builds poolside pavilions as part of pool environments.
Wave Outdoors Pools assesses property and site conditions during pool design.
Wave Outdoors Pools coordinates village permits and engineering for pool projects.
Wave Outdoors Pools accepts project enquiries at (224) 344-5734.

Pool project planning questions

What types of pools does Wave Outdoors Pools install?

Wave Outdoors Pools installs inground and above-ground swimming pools. Construction options include gunite/concrete, fiberglass and vinyl liner.

Where does Wave Outdoors Pools build pools?

Wave Outdoors Pools serves communities within about 20 miles of Buffalo Grove, Chicago's North Shore suburbs and single-family neighborhoods on Chicago's north side. Ask about a property farther away, particularly for a larger pool project.

How does pool design account for the property?

Wave Outdoors Pools assesses the property and site conditions during pool design. Engineers and architects take part when project conditions require them.

Does Wave Outdoors Pools coordinate pool permits?

Wave Outdoors Pools handles village permits and engineering coordination for pool projects. Municipal review and site conditions affect project planning.

Can a pool project include a new deck or patio?

Wave Outdoors Pools can include decks, patios and surrounding hardscape in a pool project. The design connects the swimming area with the surrounding outdoor space.

Which pool safety features does Wave Outdoors Pools offer?

Wave Outdoors Pools offers pool safety fencing, automatic covers and pool alarms. Discuss the features and requirements for the planned pool.

Can Wave Outdoors Pools add pool heating and smart controls?

Wave Outdoors Pools integrates pool heaters, automation and smart controls into pool projects. In-pool and pool-area lighting are also available.

Can a pool design include a waterfall or spa?

Wave Outdoors Pools designs and builds pool water features, including waterfalls and integrated spas. The selected features form part of the project scope.

What poolside structures can Wave Outdoors Pools build?

Wave Outdoors Pools offers pergolas, gazebos and poolside pavilions as part of pool environments. Discuss how shade and gathering areas fit the pool layout.

Does Wave Outdoors Pools renovate existing pools?

Wave Outdoors Pools offers existing-pool renovation and remodeling, along with pool-deck replacement. Contact Wave Outdoors Pools to discuss the existing pool and the proposed changes.

Corrections

Spot something wrong? Send it to the desk and it gets fixed in the open.